0584477 – COIL LAM (USED, IMAGE SHOWN IS NEW PRODUCT)
0584477 – Ignition Coil and Lamination with Grommet
Fits: 1957-1990 (2 – 6 HP Engines with points and condenser ignition)
IMPORTANT INSTALLATION NOTICE:
After installing this coil, the armature plate should be rotated over its full range of travel to ensure that it turns freely when the motor is running. If any interference is observed, the two coil mounting screws should be checked to see if they are contacting the top of the flywheel. If they are, remove the two coil mounting screws and grind or file the end of each screw to eliminate any interference. After shortening the screws, each tip should be ground to a slight point to facilitate reassembly of the coil. To keep the existing threads free of metal particles during grinding or filing, attach a 10-24 nut to the screw prior to grinding. After the modification is completed, remove the nut from the screw and reassemble the coil.
Evinrude Johnson OMC Coil & Lamination Assy, w/grommet 0584477 is equivalent to parts:
- Sierra Marine – 18-5181
- Evinrude Johnson OMC BRP – 777659
- OBR Red Rhino – JE-C100
- Mallory Marine – 9-23102
- GLM – 72100
- CDI Electronics – 183-4477
Original Evinrude Outboard, Johnson Outboard, OMC Inboard, OMC Stern Drive, OMC Sail Drive and OMC Sea Drive parts.