Epoxy/Filler/Adhesive – West System – 405 Filleting Blend


Epoxy/Filler/Adhesive – West System – 405 Filleting Blend

A in stock (can be backordered)

  Ask a Question


Epoxy/FIller/Adhesive – West System – 405 Filleting Blend

West System – 405 Filleting Blend
This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding. Its colour is a consistent brown, so 405 can be used to modify the shade of other WEST SYSTEM fillers.

Colour: Brown

You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.


Good to know

  • Used as a thickening additive with resin/hardener
  • Blend it with 105 resin, G/Flex, or G/5 adhesive
  • This wood-toned filler is good for use in glue joints and fillets

MFG#; C405

Alternative numbers: 8960610 – 405 Filleting Blend 8 oz Package



Additional information

West Syste- 405 Filleting Blend

Filleting and Fairing with 405 Filleting Blend

Gluing plywood structures together with epoxy fillets saves a lot of time when making joints. It can also reduce the structural, in comparison to traditional building methods such as using wooden cleats and screws. The strength and gap-filling qualities of epoxy eliminate the need for precisely fitted wood cleats, which also require time and skill to create. When glued with conventional, non-gap filling adhesives such as resorcinol glue, wood cleats must be well fitted, and wide enough to provide a sufficient gluing surface. They must also be thick enough to allow you to drive in screws.

Building with epoxy fillets is especially beneficial when attaching bulkheads to hull sides, or hull sides to hull bottoms, where the faces of the plywood come together at ever-changing angles.
Why use fillets?

When you thicken epoxy to a non-slumping consistency, it can bridge large gaps. With high-density fillers, this means you can make wood joints without sacrificing strength. This saves you time and effort in creating a strong joint.

A fillet is a continuous bead of thickened epoxy you apply to the joint angle between two parts. It increases the surface area of the bond and serves as a structural adhesive and brace. Fillets are an effective glue joint that requires no fasteners of any kind. A fillet can be just as strong as the parts it’s joining together. Using fillets saves the time and effort otherwise needed for strong, reliable joinery.

An epoxy fillet can be especially effective when you’re joining parts that meet at difficult angles. For example, where bulkheads meet the hull sides. Or where plywood hull sides meet the hull bottom. And at the chine, where hull sides meet at the bow. Also, where the hull sides join the deck at the sheer. Historically, all of these joints required well-fitted pieces of wood that could be glued and screwed into. It’s nice to know that with fillets, you don’t need perfectly fitting joints. Compared to traditional joinery methods, fillets can also save you the expense, weight, and labor of adding screws or other fasteners—without sacrificing joint strength.

Read more about bonding with epoxy fillets at


There are no reviews yet.

Be the first to review “Epoxy/Filler/Adhesive – West System – 405 Filleting Blend”

Your email address will not be published. Required fields are marked *

No more offers for this product!

Refund Policy

Please click here to view the "Refund Policy"!

Cancellation / Return / Exchange Policy

Please click here to view the "Return Policy"!

General Inquiries

There are no inquiries yet.