SHS – HOLDING TANK SENSORS

Description

SHS8-26410 – HOLDING TANK SENSOR – 8-1/2″ L, 2-1/8″ DIA

SHS12-26420 – HOLDING TANK SENSOR 12-3/4″ L, 2-1/8″ DIA

SHS16-26430 – HOLDING TANK SENSOR 16-1/2″ L, 2-1/8″ DIA

The Holding Tank Level Sender is used in mainly black or grey water tanks. Can also be used in freshwater tanks.

Part Number
SHS8-26410, SHS12-26420, SHS16-26430
Manufacture
KUS

Description

• IP Rating: IP 67
• Length Range: 4″, 6″, 8″, 12″, 16″, 18″, 20″, 22″, 24″, 28″, & 38″
• Material: SS316 Stainless Steel
• Max Current: 500mA
• Mounting: NPT 1 1/2″ thread twist-in, with standard 6 hole thread flange plate, standard 6 holes under the ring, and 6 pieces of M5x30 screws
• Operating Temperature: -40°F ~ +185°F (-40°C ~ +85°C)
• Output Signal: 240-33Ω
• 0 – 190Ω available upon request
• Rated Power: 125mW
• Resolution Range: 10~40mm
• Wire: PVC material (PA corrugated pipe cover is optional)

Additional Information:

• Sending Unit Installation Guide
• Troubleshooting Guide
• Data Sheet
• Please note that they recommend a 25% clearance from the bottom of the holding tank.

Alternative Part Numbers:

• 45-546, 9945-546
• SHS8-26410
• 45-547, 9945-547
• SHS12-26420
• 45-548, 9945-548
• SHS16-26430